What Setting Should My Pool Pump Be On to Vacuum?

Most pool vacuums work in collaboration with the suction of the circulation pump of the pool to get rid of debris and dirt from the walls and floor of the pool. You need to plug the hose of the pool vacuum into the inlet that is present at the lower part of the skimmer well.

This diverts the suction of the pump to the head of the vacuum. Then, you have to roll it back and forth from above the bottom of your pool. All the sediment gets sucked up by the pool vacuum.

After that, it is taken in through the inlet of the skimmer and it goes to the pump. When the pool water is pressurized to run by the pool pump, there are you that you can choose to fix the direction of the water. Therefore, it is vital that you choose the right setting on the filter valve to determine the desired direction of water flow.

You may explore 10 Best Above Ground Pool – Classic & Latest Model 2022

Look into the top 5 pool pumps for your above ground pool

Which Setting is Appropriate When the Pool Has Ordinary Conditions?

For normally vacuuming on a regular basis, the filter valve should be kept in the “Filter” state. This makes the dirty water of the vacuum go through the filter to get rid of all the contaminants present in the water.

After that, the filtered water returns to the pool with the back lines. If your pool has lightweight and moderate sediment, then it is best for you to go with the “Filter” setting for vacuuming. This works great for such water because once the water gets returned to your pool; the water level gets preserved again.

You must explore 5 Best Summer Waves Pool Reviews

Explore this to The 10 Bestway Pool Reviews

Which Setting is Appropriate When the Pool Has Heavy Contamination?

If a high level of sediment is present in your pool, then the “filter’ setting might not work well. If algae have made a home at the walls and bottom of your pool, you should set your multiport valve to ‘Drain’ or “Waste” setting. When you select these settings, the contaminated water does not bypass the filter and gets diverted towards an external drain for disposing of it.

Therefore, the filter of the pool does not have to handle the overload of the sediment. However, you need to refill the pool with water once after vacuuming with this setting. This is simply because the water gets discharged through the drain and goes to waste. So, make sure to add water to the pool to normalize the water level.

Why is it Essential to Vacuum Your Pool?

Vacuuming your pool is the best way to get rid of all the undesired substances present on the bottom of your pool unless you own a robotic cleaner for it. Not only it deals with all the sticky mess in the pool, but it also washes away the microscopic algae that survived the filter system of your pool.

These microscopic algae can cause a lot of problems if it is not removed. Therefore, it becomes essential to vacuum your pool from time to time. Plus, to be accurate, the task of vacuuming is not as exhausting as it seems. You just need the right knowledge to use the pump or filter system of your pool. Use the settings of your pump in accordance with the kind of sediment present in the pool, just as mentioned above.

How Often Should the Pool Be Vacuumed?

You should vacuum their pool at least once a week. The pool skimmers can only remove dirt, debris, and leaves that are floating on the surface of the water. But you should know that most fragments that enter into a pool float for three to four hours only. After that, the debris sinks and settles on the bottom of the pool. Therefore, you should not rely on just the skimmers.

Mistakes to Avoid While Cleaning Your Pool

If you own a pool or work for the maintenance of swimming pools, you should make sure to vacuum properly. Here we are listing the mistakes that you should avoid when you clean a pool:

  • You should not vacuum algae or heavy sediment with a “Filter” setting on your multi-port valve.
  • You should not vacuum your pool with a “backwash” position on the filter valve.
  • Do not avoid using a wire brush to remove black algae.
  • You should not ignore the dirt and leaves in an open winter swimming pool.
  • You should never “float up” your skimmer basket.
  • You should not initially place an automatic cleaner into a pool if it is very dirty.

If you avoid making these mistakes, you will save yourself from any potential trouble. Plus, your work will get completed in less time.

My name is Ron Walsh. I’m an industry expert, certified pool technician, and avid lover of all things aquatic. In my beautiful homeland of Florida, where I still reside today, pools are everywhere. Needless to say, I learned to love water at a young age. With my love of water, and pools in particular, it was only natural that I follow a career path in the swimming pool industry. If there’s someone to learn about above ground pools, pool cleaners and maintenance from, it would definitely be me. If you have any question just let me know.

Be the first to write a review

Leave a Comment